Cheap Ad-Blueobd2 Emulator For RENAULT Trucks Override AD-Blue System Instantly
Item No.: CO23447984
Cheap Ad-Blueobd2 Emulator for RENAULT Trucks
Drive your truck without Diesel Exhaust Fluid!
ad-BlueOBD2 is a Plug & Drive Ready device to emulate working ad-Blue systems and NOx sensors on trucks, which equipped with EURO 4/5/6 catalytic converter systems, even with damaged ad-Blue SCR system.
AD-Blue/DEF (Diesel Exhaust Fluid) is used to reduce NOx emissions in vehicles. We recommend you to use AD-Blue/DEF fuel. You can use this device, if you are unable to find a station to fuel up your ad-Blue/DEF tank.
Top 7 Reasons to Get Ad-blue OBD2:
1. ad-BlueOBD2 is a device which can be plugged into OBD2 connector of your truck to emulate working
2. ad-Blue system and NOx sensor on trucks, even with damaged ad-Blue SCR system.
3. ad-BlueOBD2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.
4. ad-BlueOBD2 will override AD-Blue system instantly, it will stop the usage of ad-Blue liquid and disable Nox sensors.
5. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
6. ad-BlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting.
7. ad-BlueOBD2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug ad-BlueOBD2 from OBD2 connector.
AD-BlueOBD2 Installation and Calibration:
1. Pull the Key out from the ignition.
2. Remove the following Fuses (RENAULT)
3. Plug ad-BlueOBD2 into OBD2 connector
4. Turn on the ignition and check the level of ad-Blue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.
1pc x ad-BlueOBD2 Emulator Box Interface